Storing Channels In Memory - JVC KD-S88BT Instructions Manual

Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available
before activation.
1
] "XM"
XMDirect ™ Tuner Box or XMDirect2
Tuner System starts updating all the
XM channels. "Channel 1" is tuned in
automatically.
2 Check your XM Satellite Radio ID labelled
on the casing of the XMDirect™ Tuner
Box or XMDirect2 Tuner System, or tune
in to "Channel 0". (See right column.)
3 Contact XM Satellite Radio on the
internet at <www.xmradio.com> and
click on "Activate Radio", or you can call
1-800-XM-RADIO (1-800-967-2346).
• Once activated, the unit can then be
tuned to one of the available channels.

Storing channels in memory

You can preset up to 18 channels for both
SIRIUS and XM.
1 Tune in to a channel you want to store.
(Steps ~ – !, see page 23.)
2
[Hold]
"PRESET MODE" flashes.
3
] Selects a preset number.
Preset number flashes and "MEMORY"
appears.
24 ENGLISH
Selecting SIRIUS/XM preset
station
Checking the satellite radio ID
While selecting "SIRIUS" or "XM"...
] Select "Channel 0."
SIRIUS: The 12-digit SIRIUS ID will be displayed
after "Channel 0" is selected.
XM: The display alternately shows "RADIO ID"
and the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than "Channel 0."
Changing the display information
Category name = Channel name = Artist
name = Composer name * = Song/program
name/title = Clock = (back to the beginning)
* Only for SIRIUS Satellite radio.
Using the remote controller
5 / ∞ : Changes the categories.
2 / 3 : [Press] Changes the channels.
[Hold] Changes the channels rapidly.
Additional information
To learn more about SIRIUS/XM programming or to
become a subscriber, please visit
<www.siriusxm.com>.