Lenovo Ideapad 300-14IBR Hardware Maintenance Manual page 40

Ideapad 300-14IBR/Ideapad 300-15IBR Hardware Maintenance Manual
Figure 2. Removal steps of hard disk drive (continued)
Ideapad 300-15IBR
When installing: Make sure that the HDD connector is attached firmly.
Remove the screws 3 and detach the metal frame from the hard disk drive.
36
Step Screw (quantity)
M2 × 6 mm, Phillips-head, nylok-coated (3)
1
HDD BRK + D/C (Ideapad 300-14IBR)
M2 × 6 mm, Phillips-head, nylok-coated (4)
1
HDD BRK + D/C (Ideapad 300-15IBR)
3
Step Screw (quantity)
M3 × 3 mm, Phillips-head, nylok-coated (4)
3
HDD+HDD BKT
2
3
3
Color Torque
Black 1.5 ~ 2.0 kgf*cm
Black 1.5 ~ 2.0 kgf*cm
3
Color Torque
Silver 2.5 ~ 3.0 kgf*cm