General Information - HUSTLER 3700 Operator's Manual

This manual applies to the following Hustler equipment
lines:
Hustler 3700
To the new owner
The Hustler equipment lines, listed above, are designed to be
used as riding lawn mowers. they must be used for mowing
purposes only.
The purpose of this manual is to assist owners and operators
in maintaining and operating the 3700 power unit. Please read it
carefully; information and instructions furnished can help you
achieve years of dependable performance.
A separate Engine Owner's Manual is included with your
owner's packet which contains additional engine information
that will not be repeated in this manual. You are urged to read it
before attempting any operation or repair of the engine.
The decals are designed to give the operator brief information
needed in the daily operation and service of the machine. These
decals are not intended to be used in place of this manual but
instead are to be used as an extension of this manual. These
decals should not be removed or obliterated. Replace these
decals if they become unreadable.
It is the owner's responsibility to make certain that the
operators and mechanics read and understand this manual and
all decals before operating this machine. It is also the owner's
responsibility to make certain that the operators and mechanics
are qualified and physically able individuals, properly trained in
the operation of this equipment. All operator and mechanics
must become familiar with the safe operation of the equipment,
operator controls and safety signs.
Never let children or untrained people operate or service the
equipment. Local regulations may restrict the age of the
operator.
For more detailed maintenance and adjustment information
refer to the proper parts manual for your machine. Refer to the
Product Literature section of this manual for ordering
information.
The owner/user can prevent and is responsible for accidents or
injuries occurring to themselves, other people or property.
Using this manual
General operation, adjustment and maintenance guidance is
outlined for both the experienced and novice Hustler user.
Operating conditions vary considerably and cannot all be
addressed individually.
operators should find no difficulty in developing good operating
skills suitable to most conditions.
Directions used in this manual, for example RIGHT or LEFT,
refer to directions when seated on power unit facing forward,
unless otherwise stated.
Photographs and illustrations used were current at the time of
printing, but subsequent production changes may cause your
machine to vary slightly in detail. Hustler Turf Equipment
reserves the right to redesign and change the machine as deemed
necessary, without notification and without incurring any
obligation to make changes or additions to equipment sold
previously. If a change has been made to your machine which is
109627CE_0512

GENERAL INFORMATION

Through experience, however,
not reflected in this owner's manual, or the parts manual, see
your Hustler dealer for current information and parts.
Warranty registration
The Delivery and Warranty Registration form must be
completed and signed to validate your warranty protection. As
the new equipment owner, you are expected to see that the form
is completed and forwarded to Hustler Turf Equipment at time
of delivery.
Be sure to register the power unit plus each attachment that
displays a model and serial identification number plate with
Hustler Turf Equipment.
IMPORTANT: Any unauthorized modification, alteration,
or use of non-approved attachments voids the warranty and
releases Hustler Turf Equipment from any liability arising from
subsequent use of this equipment.
power unit gross vehicle weight (GVW)
This power unit has a maximum gross vehicle weight (GVW)
of 3500 lbs. which must not be exceeded. Use only Hustler
approved attachments and accessories
Model and serial number
power unit model and serial numbers are found on the serial
identification plate, located on the frame directly in front of the
left rear wheel.
These numbers are required on the Warranty Registration
form. They will also assure you of the correct service parts
when replacement becomes necessary.
Shown below is an example of a serial identification plate and
how to interpret it.
Year
2003
Parts and service
Use original Hustler replacement parts only. These parts are
available through your local Hustler dealer. To obtain prompt,
efficient service, always provide the following information
when ordering parts:
1. Correct part description
2. Correct part number
3. Correct model number.
4. Correct serial number.
All warranty repair and service must be handled through an
1-1
Month Serial
Weight of machine
Number
November without operator
REV F