Sound Menu - Cadillac 2008 Escalade Navigation System Owner's Manual

4. Seek, scan, or tune to the desired station, to select
the station.
5. Press and hold one of the preset screen buttons for
more than two seconds or until you hear a beep.
6. Repeat the steps for each preset.

Sound Menu

e (Sound): Press this key or press the CONFIG key
to access the Sound menu to adjust the treble,
midrange, bass, fade, balance, and Digital Signal
Processing (DSP). The system automatically stores
audio adjustment settings as changes are made for each
audio source including AM, FM, XM (if equipped), CD,
and AUX.
Setting the Tone
TREBLE: Touch the plus (+) or minus (−) sign to
increase or decrease the treble. If a station is weak or
noisy, decrease the treble.
MID (Midrange): Touch the plus (+) or minus (−) sign
to increase or decrease the midrange.
BASS: Touch the plus (+) or minus (−) sign to increase
or decrease the bass.
Adjusting the Speakers
L/R (Left/Right) (Balance): To adjust the balance
between the left and the right speakers, touch and hold
the L or R screen buttons.
Front/Rear (Fade): To adjust the fade between the
front and the rear speakers, touch and hold the Front or
Rear screen buttons.
Digital Signal Processing (DSP)
The system has Digital Signal Processing (DSP). DSP
is used to provide a choice of four different listening
experiences. DSP can be used while listening to
the audio system. Not all DSP modes are available for
all source types. The type of DSP selected is
displayed on the status line.
3-5