A-S500/A-S300
When checking the P.C.B.s:
•
Put the rubber sheet and cloth over this unit. Then
place the sub-chassis unit on the cloth and check it.
(Fig. 4)
•
Connect the ground point of the sub-chassis unit to
the chassis with a ground lead or the like. (Fig. 4)
•
Reconnect all cables (connectors) that have been
disconnected.
•
When connecting the flexible flat cable, be careful
with polarity.
Rubber sheet and cloth
ゴムシートと布
14
Sub-chassis unit
サブシャーシユニッ ト
Ground lead
アース線
P.C.B. をチェックする場合には:
・ 本機の上にゴムシートと布を敷き、その上にサブ
シャーシユニットを置いてチェックします。 (Fig. 4)
・ サ ブ シ ャ ー シ ユ ニ ッ ト の ア ー ス を リ ー ド 線 等 で
シャーシに接続してください。 (Fig. 4)
・ 外したケーブル(コネクター)をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
ださい。
Fig. 4