Keurig K10 Mini Plus Owner's Manual page 17

Brewer will not brew when used for the first time
Downloaded from www.Manualslib.com
P17 201309003 KER755_K10.pdf 1C( K) ZB2319 2013.09.06
SiTUATion
Brewer only brews a partial brew
Brewer shuts off automatically
There is water in the Drip Tray
Red indicator appears in Drip Tray
manuals search engine
SoLUTion
• Brewer may be cold or frozen. Let brewer rest at room temperature for at least 2
hours before powering on.
• Make sure the brewer has power (see previous page).
• Allow enough time for water in the Cold Water Reservoir to drain completely into the brewer.
• The Exit Needle may be clogged (see page 12).
• Clean the K-Cup Pack Assembly, if necessary (see page 12).
®
• Descale the brewer (see page 14).
• If you have repeated the descale procedure two times and the brewer still does not
function properly, contact Customer Service.
• Under normal operation, the brewer will shut off when it is idle for longer than 90 seconds.
Just press the Power Button to restart.
• If the brewer shuts off in the middle of a brew (not from power outage), contact Customer Service.
• Remember that any liquid overflow (from your cup or the Cold Water Reservoir) will be
caught in the Drip Tray.
• When the Drip Tray is almost full, the red Drip Tray Overflow Indicator will appear. Carefully
remove the Drip Tray and empty its contents into the sink.
• This means that the Drip Tray is almost full. Carefully remove the Drip Tray and empty its
contents into the sink.
Should other issues arise with your brewer, please call
Keurig Customer Service at 1.866.901.BReW (2739).
17