Important Safety Instructions - Panasonic GP-VD151 Operating Instructions Manual

Safety precautions

IMPORTANT SAFETY INSTRUCTIONS

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the
applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
8) Protect the power cord form being walked on or
pinched particularly
receptacles, and the point where they exit from
the apparatus.
indicates safety information.
with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous Substances
The Product is in conformity with the requirements of Technical Regulation on the Restriction Of the use of certain Hazardous
Substances in electrical and electronic equipment (TR on RoHS).
The content of hazardous substance with the exemption of the applications listed in the Annex №2 of TR on RoHS:
1. Lead (Pb) – not over 0,1wt % or 1000wt ppm;
2. Cadmium (Cd) – not over 0,01wt % or 100wt ppm;
3. Mercury (Hg) – not over 0,1wt % or 1000wt ppm;
4. Hexavalent chromium (Cr
5. Polybrominated biphenyls (PBBs) – not over 0,1wt % or 1000wt ppm;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0,1wt % or 1000wt ppm.
at plugs, convenience
Declaration of Conformity
in Electrical and Electronic Equipment
(adopted by Order №1057 of Cabinet of Ministers of Ukraine)
6+ ) – not over 0,1wt % or 1000wt ppm;
2 (E)
9) Only use attachments/accessories specified by
the manufacturer.
10) Use only with the tripod or table specified by the
manufacturer.
11) Unplug this apparatus during lightning storms or
when unused for long periods of time.
12) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.