General Operation - Oregon Scientific HT255 Original Instruction Manual

OREGON® CORDLESS TOOL SYSTEM
HEDGE TRIMMER MODEL HT255
INSERTING AND RELEASING
THE BATTERY PACK
Only use the OREGON® brand battery
packs specified in these operating
instructions
Align the groove in the battery with the
rails inside the battery port Firmly insert
the battery pack into the hedge trimmer's
battery port, pressing forward until it
clicks as it locks into place (Fig 10)
FIG. 10
To remove the battery pack, lift up on
the battery release and remove the pack
(Fig 11)
FIG. 11
AD 0213 - F/N 558936
OPERATING THE HEDGE TRIMMER

GENERAL OPERATION

WARNING: ALWAYS WEAR PROPER
GLOVES AND EYE PROTECTION.
OPERATING TEMPERATURE
This hedge trimmer is designed to
operate within a temperature range of
0°C to 40°C (32°F to 104°F)
GRIP
Always grip the tool with both hands
For right-handed operation, place the
hedge trimmer on a firm, flat surface,
grasp the front handle with the left hand
and the rear handle with the right Wrap
fingers over the top of the front handle
with the thumb below (Fig 12)
FIG. 12
RIGHT-HANDED GRIP
For left-handed operation, grasp the front
handle with the right hand and the rear
handle with the left (Fig 13)
FIG. 13
LEFT-HANDED GRIP
17