Axis Ip Utility - Single Camera/Small Installation; Automatic Discovery; Assign The Ip Address Manually (Optional) - Axis M1011 Installation Manual

AXIS M1011/M1011-W/M1031-W Installation Guide Page 7

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS M1011/M1011-W/M1031-W.

Automatic discovery

1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 9 for instructions on how to assign the password.

Assign the IP address manually (optional)

1. Acquire an unused IP address on the same network segment as your computer.
2. Select the camera in the list.
3. Click the button Assign new IP address to the selected device and enter the IP address.
4. Click the Assign button and follow the on-screen instructions. Note that the camera must be
restarted within 2 minutes for the new IP address to be set.
5. Click the Home Page button to access the camera's web pages.
6. See page 9 for instructions on how to set the password.