Mounting The Camera - D-Link DCS-960L User Manual

Section 2 - Installation
To mount your camera on a wall or ceiling, please follow the steps below. It is recommended that you configure the camera before mounting.
Step 1
Turn the base plate on the bottom of the camera counterclockwise with a coin to remove it.
Step 2
Place the base plate where you want to position the camera and use a pencil to mark the holes. Make sure
the holes are lined up horizontally.
Step 3
Depending on the material of the wall or ceiling, use proper tools to drill two holes 25mm deep with a 6mm
drill bit where you marked. If the wall is made out of concrete, drill the holes first, then insert the plastic
anchors to support the screws.
D-Link DCS-960L User Manual

Mounting the Camera

1
2
3
14