Zero Configuration Setup - D-Link DCS-960L User Manual

Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration Setup. Zero Configuration automatically configures
your camera's settings for you, and adds the camera to your mydlink account automatically. This type of setup allows you to set up your camera by
simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-960L and add the camera
to your mydlink account. After the short time it takes to do this you can remotely access your camera from the website (http://www.mydlink.com)
to manage and monitor your DCS-960L.
Plug in the External Power Adapter
Connect the power adapter to the microUSB port on the back of the camera. Plug the
power adapter in to a wall outlet.
Press the WPS button on your camera
Press and hold the WPS button for three seconds. The WPS status LED will start blinking
green.
Press the WPS button on your Cloud Router
Press the WPS button on your router within 60 seconds. The WPS button is usually on the
side or back of your Cloud Router. The DCS-960L will automatically create a secure wireless
connection to your router and reboot. When it has successfully connected, the Power LED
will be lit green.
D-Link DCS-960L User Manual

Zero Configuration Setup

11