Samsung SCH-r610 User Manual page 70

Alerts
Your phone can alert you with an audible tone when you change service areas,
once a minute during a voice call, when a call has been connected, and when
turning your phone on and off. The different options available are:
•
Minute Beep: An alert tone is sounded every minute that you are connected.
•
Service: An alert tone is sounded when you come in or out of your coverage
area.
•
Connect: An alert tone is sounded when you are initially connected.
•
Sig. Fade Tone: An alert tone is sounded when your phone partially loses signal
due to network conditions or leaving network coverage area.
•
Roam: An alert tone is sounded when your phone enters a roaming area.
To enable or disable alert sounds:
1. Activate the main menu, highlight the Settings menu, and press
2. Select Sounds.
3. Select Alerts.
4. Press the navigation key up or down to select the desired alert.
5. Select On or Off using the navigation key and press
Key Tone
You can select the audible tones accompanying a key press. There are three
different tones available:
•
DTMF: Normal, touch-tone beeps are heard when a button is pressed.
•
Xylophone: Polyphonic 'xylophone' tones are heard when a key is pressed.
•
Voice: The number or symbol of the key is heard when you press a key.
To select a key tone:
1. Activate the main menu, highlight the Settings menu, and press
2. Select Sounds.
3. Select Key Tone.
4. Select Tone Type.
5. Press the navigation key up or down to select the desired tone type.
6. Press
64 Settings
MENU
to save and exit.
MENU
.
MENU
to save and exit.
MENU
.