Direct Code Set Up - One for All URC-7110 Manual Instructions

• Search Method * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
• Extra Features
(see manual on our internet site)
• Key Magic®
• Macro
1
2
Press and hold magic for 3 seconds until the blue LED (any LED) stays on.
3
Enter the 1st code listed for your
device type & brand (e.g. TV
Hitachi = 1576)
4
Congratulations! You should now be able to switch your device back ON
and control your device successfully.
8
Instruction manual

Direct Code Set Up

3 sec.
Press POWER.
Find the code for your device in the Code list
(page 50 - 57). Codes are listed by device type
and brand name. The most popular code is
listed first. Make sure your device
is switched on (not on standby).
--> The blue LED will blink twice and
then switch off.
If your device does NOT switch off?
--> Please repeat steps 1 - 3 trying
the next code listed for your
brand.
If NOT successful?
--> Try the Search Method.
x2
OFF
=
Ready
WWW ONEFORALL COM