Miele CVA 6805 Operating And Installation Instructions page 82

Built-in coffee system
Table of Contents

Advertisement

Frequently Asked Questions
Problem
The coffee system does
not switch itself on, al-
though the timer setting
Turn on at
has been acti-
vated.
The display is hard to
see or not legible.
Fill and replace the water
container
appears after
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
Empty the drip tray
pears in the display,
even though the drip
tray is empty.
82
Possible cause and solution
The system lock feature has been activated.
 You need to deactivate the system lock (see "Set-
tings - System lock").
A day of the week has not been selected.
 Check the timer settings and change them if re-
quired (see "Settings - Timer").
The machine was not used after being switched on
automatically three times in succession.
 Switch the machine on and dispense a drink.
The display brightness has been set too low.
 Change this setting (see "Settings").
The coffee system needs to be descaled.
 Turn the coffee system off with the On / Off  but-
ton. Wait approx. 1 hour.
 Switch on the machine again. As soon as
ing
appears, tap
and then select
 Descale the coffee system. You may need to re-
peat the descaling process.
ap-
The drip tray is not positioned correctly in the ma-
chine.
 Push the drip tray in as far as it will go.
The drip tray sensing mechanism is not working. The
contacts are soiled.
 Clean the contacts and the space between them,
and dry them thoroughly (see "Cleaning and care -
Drip tray").
Maintenance
at the bottom right
.
Descale
Preheat-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents