Step 3: Connecting The Video Cords; Step 4: Connecting The Audio Cords - Sony DVP-NS15 Service Manual

DVP-NS15/NS51P/NS43P/NS53P/K56P

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use pattern C.
A
(yellow)
INPUT
Audio/video
VIDEO
cord (supplied)
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT (VIDEO)
(green) (blue)
Component video
cord (not supplied)
l : Signal flow
A
If you are connecting to a video input jack
Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will
enjoy standard quality images.
With this connection, select "LINE OUT/S VIDEO OUT" (default) by pressing the
PROGRESSIVE button on the front panel.
Yellow
White (L)
Red (R)
Selecting the video output jack and signal format (PROGRESSIVE
button)
By using the PROGRESSIVE button on the front panel, you can select the jack from which the
player outputs Progressive or Interlace signals. The default setting will output Interlace signals
from the LINE OUT(VIDEO) or S VIDEO OUT jacks.
Press the button once to switch to the COMPONENT VIDEO OUT jacks. Each additional press
of the button will change the output signal as shown below.
Setting/Display
"LINE OUT/S VIDEO OUT"
"NORMAL (INTERLACE)"
"PROGRESSIVE AUTO"
"PROGRESSIVE VIDEO"
Note that signals are not output from the COMPONENT VIDEO OUT jacks when "LINE OUT/
S VIDEO OUT" is selected, and signals are not output from the LINE OUT(VIDEO) or S
VIDEO OUT jacks when any other setting is selected.
◆When your TV is connected to jack other than COMPONENT VIDEO OUT jacks (LINE
OUT(VIDEO) or S VIDEO OUT), select:
- "LINE OUT/S VIDEO OUT"
◆When your TV is connected to COMPONENT VIDEO OUT jacks, select:
- "NORMAL (INTERLACE)"
- "PROGRESSIVE AUTO"
Normally select this if your TV is compatible with progressive signals. This automatically
detects the software type, and selects the appropriate conversion method.
- "PROGRESSIVE VIDEO"
Select this if your TV is compatible with progressive signals and the image is not clear when
you select PROGRESSIVE AUTO. This setting will fix the conversion method to
PROGRESSIVE VIDEO for video based software.
About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at
30 frames/60 fields (25 frames/50 fields) per second. Film-based software is derived from film
and displays images at 24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format,
the progressive signals need to be converted to match the type of DVD software that you are
watching.
Notes
• When you play video-based software in progressive signal format, sections of some types of images may
appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT
jacks.
• Using the COMPONENT VIDEO OUT jacks will cause the picture to go blank. In this case, press the
PROGRESSIVE button to see the picture.
• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture will go blank when your setting is
"NORMAL (INTERLACE)", or "PROGRESSIVE AUTO", or "PROGRESSIVE VIDEO". In this case,
press the button repeatedly until you see the picture.
S VIDEO cord
INPUT
(not supplied)
S VIDEO
TV, projector, or AV
amplifier (receiver)
(yellow)
to S VIDEO OUT
to COMPONENT CD/DVD player
VIDEO OUT
(red)
COMPONENT
VIDEO IN
Y
(green)
P /C
B B
(blue)
P /C
R R
(red)
TV, projector, or AV
amplifier (receiver)
Yellow
White (L)
Red (R)
,continued
Front Panel Display Output Connection
LINE/S LINE OUT or S VIDEO OUT jacks
COMPONENT COMPONENT VIDEO OUT jacks
P AUTO COMPONENT VIDEO OUT jacks
P VIDEO COMPONENT VIDEO OUT jacks
B
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select "LINE OUT/S VIDEO OUT" (default) by pressing the
PROGRESSIVE button on the front panel.
C If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
B
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel to output progressive signals. For details, see
"Selecting the video output jack and signal format (PROGRESSIVE button)" (page 17).
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 58.
To change the colour system
If the on-screen menu of the player does not appear on the connected TV, switch the player's
colour system to match the colour system of the TV (NTSC or PAL).
First turn off the player by pressing "/1, and then press "/1 again while holding down x on the
player. The player turns back on, and the name of the colour system scrolls across the front panel
C
display.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
15 16

Step 4: Connecting the Audio Cords

Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
* The yellow plug is used for video signals (page 15).
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
17 18
1-4
Green
Blue
Red
VCR
CD/DVD player
Connect
directly
(red) (yellow)*
Audio/video
cord (supplied)
(white)
(white)
(yellow)* (red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT (COAXIAL
or OPTICAL)
or
Coaxial digital cord
(not supplied)
Optical digital cord (not supplied)
to optical to coaxial
[Speakers]
digital input digital input
Rear (L)
Front (L)
AV amplifier (receiver)
with a decoder
Centre
: Signal flow
/C , P /C )
B B R R
Green
Blue
Red
TV
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
CD/DVD player
B
[Speakers]
Rear (R)
Front (R)
Subwoofer