Av (Good) - Insignia NS-55D421NA16 User Manual

AV (good)

Notes
On your TV
AV Audio cable
connector connectors
AV jack Analog audio
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the green VIDEO / Y jack and L and R AUDIO IN jacks on the back of your TV
and to the AV and audio out jacks on the cable or satellite box.
Important
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight Component/AV, then press ENTER.
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
VIDEO / Y jack.
jacks
• The VIDEO / Y, PB, and PR video jacks (used to connect a component
device) share the L and R AUDIO IN jacks with the VIDEO / Y jack (used
to connect an AV device). We suggest upgrading to HDMI if your cable
or satellite box supports it.
• When you connect the audio using the L and R AUDIO IN jacks, the
audio output is analog.
www.insigniaproducts.com
Insignia 55" 1080p 60Hz LED TV
AV cable
Back of TV
Cable or
satellite box
Cable
wall jack
15