Advertisement
LED indication
Function
HBM-240 Status
Operating
Power on
Power off
Pairing mode
Headset / hands-free
profile connected
Call connected
Charging
Charging
Charging complete
Troubleshooting
Does not turn on
Check whether the battery
of the HBM-240 is fully
charged.
Unable to
Check whether
communicate with
the handset supports
®
the LG Bluetooth
the headset or hands-free
Headset HBM-240
Bluetooth profiles.
Check whether the battery
of the HBM-240 is low.
Unable to pair the
Check and make sure the
HBM-240 with the
headset is on.
Bluetooth
®
device
Check and make sure
the headset is placed
in pairing mode.
Low sound (speaker)
Check the speaker volume.
6
Action
The blue LED light flickers 4 times.
The blue LED light flickers 4 times
and then turns off.
The blue LED light stays on.
The blue LED light flickers
2 times every 5 seconds.
The blue LED light flickers
2 times every 5 seconds.
The blue LED stays on.
LED turns off.
Charge the battery.
Determine whether your
handset supports
the headset or hands-free
Bluetooth profiles.
Charge the battery.
Press and hold the MFB
button for 3 seconds to turn
on the headset.
With the power off, press and
hold the MFB button for
6 seconds to manually place the
headset in pairing mode.
lncrease the volume level.
Precautions
Do not drop the unit from high places.
Do not modify, repair, or take apart.
Do not expose directly to water, alcohol, benzene, etc. for cleaning.
Do not expose directly to flammables.
Do not place or keep the unit near flammables.
Keep unit away from humidity & dust.
Do not place heavy objects on the unit.
Only use the headset with an original LG charger, otherwise it may be damaged.
•
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
•
There is a risk of explosion if the battery is replaced by an incorrect type.
•
Dispose of used batteries according to the instructions.
Declaration of Confirmation
FCC NOTICE TO USERS :
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
IMPORTANT NOTE :
To comply with the FCC RF exposure compliance requirements, no change to the
antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user's authority to
operate the device.
Hereby, LG Electronics Inc. declares that this HBM-240 is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
7
Advertisement
