LG TONE Free HBS-FN7 - Bluetooth Stereo Headset Manual

LG TONE Free HBS-FN7 - Bluetooth Stereo Headset Manual

Also See for TONE Free HBS-FN7:

Advertisement

LG TONE Free HBS-FN7 - Bluetooth Stereo Headset Manual

NOTE: For the best performance and to prevent any damage to, or misuse of the headset, please read all of the information carefully prior to using the headset.

Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc.

What's in the Box

What's in the Box

NOTE: Actual product design may differ from images shown in manual.

*A mid-sized ear gel is attached to the earbud by default.

*The appearance and specifications of the actual product may differ depending on the model.


Make sure authentic LG Electronics components are used. Using a non-authentic component may damage the product and thus void the warranty.
Use the USB Type C™ cable provided with the product.

Overview

Charging Case

Charging Case Overview

Earbuds

Earbuds Overview

How to pair

  1. Turn on the Bluetooth function on the mobile phone or the device to be connected.
  2. Open the cover of the charging case with the earbuds mounted on the case. Press the pairing button for 3 to 5 seconds until the blue battery status lamp blinks.
    How to Pair - Step 1
  3. When the Fast Pair connection pop-up appears on the top area of the mobile phone screen, tap it to connect.
    How to Pair - Step 2
    • It only supports Android™ 6.0 or higher, and requires configuring Bluetooth and location information settings of the mobile device.
  4. If the pop-up does not appear, select [LG HBS-FN7] from the Bluetooth menu on the mobile phone and connect it (for users of iOS or Android 5.0 or lower versions).
    How to Pair - Step 3

    In the list of Bluetooth connected devices, LG HBS-FN7_LE is not the correct model name for connection. Check the model name in use and connect with the model name without "LE".
  • NOTE: To connect with another device, perform the above procedure again.

Wearing Earbuds

  1. Separate the earbuds from the charging case and adjust them so that they fit comfortably in your ears.
    • NOTE: You can easily separate the earbuds from the charging case by turning the part with dotted line in the image below to left or right and lifting the earbuds.
      Wearing Earbuds - Step 1
  2. When you wear the earbuds, you will hear a wearing detection alarm.
    Wearing Earbuds - Step 2

Playing Music

Playing Music

Function Description
Play / Pause : Touch the left or right earbud once.
Adjusting the Volume : Touch the left(Decrease volume) or right(Increase volume) earbud twice.
Play Next : Touch the left or right earbud three times.
  • NOTE: You can change the operation method of the function in the touchpad settings of the LG TONE Free app.

Placing a Call

Placing a Call

Function Description
Answering Calls : Touch the left or right earbud once.
Ending Calls : Touch the left or right earbud twice.
Rejecting Calls : Touch and hold the left or right earbud.

Listen to the Ambient Sound (LAS), Active Noise Cancellation (ANC)

Listen to the Ambient Sound (LAS)

Listen to the Ambient Sound
The Listen to the Ambient Sound (LAS) function allows you to listen to the ambient sound so that you can recognize the surrounding situation and any potential risks.

Active Noise Cancellation (ANC)

Active Noise Cancellation
The Active Noise Cancellation (ANC) function blocks any ambient sound. So, you can use the function to listen to the music or watch a video without interference.

Touch and hold the left or right earbud to switch between the ANC mode and the LAS mode.
You can set the LAS and ANC functions in the LG TONE Free app.
If you use the LAS or ANC function, the battery consumes faster, reducing the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music, or being on the phone.

  • NOTE: ANC is an acronym for Active Noise Cancellation.


When the LAS mode is enabled, you may hear the ambient sound become loud suddenly. When using the ANC function outdoors, pay attention to the surrounding environment for safety.

UVnano

The charging case has a built-in UVnano LED, which allows you to use your earbuds cleanly.
UVnano LED

If you charge the earbuds wired after mounting them on the charging case and closing the cover, the UVnano LED operates for 10 minutes.

*UVnano is a compound word derived from the words UV and its unit, nanometer.

  • NOTE: The UVnano indicator turns on blue while the UVnano LED is on.
    The UVnano LED in the charging case eliminates up to 99.9% of Staphylococcus aureus and Escherichia coli inside the earbud hole.
    In the case of a white product, discoloring may occur in the contact area of the UVnano LED, but it does not affect the product function.
    The UVnano LED does not turn on while charging wirelessly.


Be aware that the temperature of the earbuds may rise while the UVnano LED is on.

Charging

Wired Charging

When the charging cable is connected, the charging status is displayed in the charging case.
Wired Charging

  • NOTE: The earbuds and the charging case are charged at the same time. The charging port on the charging case cannot be used to supply power to mobile phones, etc.

Wireless Charging

Align the bottom center of the charging case with the center of the wireless charger.
Wireless Charging

  • NOTE: The wireless charger is not provided. The wireless charging function may not work in some wireless chargers. Wireless charging feature charges at a slower rate due to less power being transmitted to the charging case.

Checking the Battery Status

Checking the Battery Status
If earbuds are mounted in the charging case, the earbuds' battery status is displayed.

Otherwise, the charging case's battery status is displayed.

If the earbuds are mounted in the charging case while plugged in, the UVnano process will commence for ten minutes.

Once this process is complete, the charging case's battery status will be displayed.

Battery Status Indicator Remaining Battery (charger not connected) Charging State (charger connected)
Red 20% or lower Charging
Yellow 20% - 80% -
Green 80% or higher Fully charged
  • NOTE: When the charging case lid is closed, charging case battery status is displayed. If the charging case has no remaining charge, there will be no display and it cannot function. We recommend you keep the charging case charged at all times as the earbuds are not able to be turned on and turned off independently.

LG TONE Free App

If you install the "LG TONE Free" app, you can use Check Earbud Battery, Voice Alert, Change Equalizer Mode, Check Last Connected Location Information, and Find My Earbuds functions. Check out the app for more details.

To install the "LG TONE Free" app, search LG TONE Free in the Google Play Store or App Store or scan the QR code below.

It supports Android 5.0 or higher and iOS 11 or higher.

play.google.com

Google Play

www.apple.com

App Store

Safety Precautions

The following safety precautions are provided to prevent any unexpected accident or damage. Please familiarize yourself with the safety precautions.

The safety precautions are classified into "WARNING" and "CAUTION".


Failing to comply with the instructions may result in serious injury or death.


Failing to comply with the instructions may result in minor injury or product damage.


Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof). (The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location such as a bathroom.


Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or flammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small component of the product.
Make sure that foreign objects do not enter the charger's connectors (charging port and power plug). Failure to do so may result in fire or electric shock.
If you have a medical device implanted, contact your doctor before using this device.
This product has a built-in battery, and the battery cannot be removed or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don't replace it correctly, it may explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualified professional can cause damage to your device.
Do not discard the battery arbitrarily. Follow the local procedure for discarding batteries.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.

Troubleshooting

If you see any of the following symptoms while using the product, make sure to recheck it. It may not be a malfunction.

Symptom Cause and Solution

The power does not turn on

Check the battery level and charge it.

If unable to make a call with earbuds

If the mobile phone does not support headset and hands-free functions, you cannot use the calling features.
Check the battery level and charge it.

If unable to register earbuds to mobile phone

Check whether earbuds are turned on.
Check if the charging case of earbuds are in search mode.
  • Press the pairing button on the charging case to switch to search mode.

If you replaced the earbuds or there is a problem with the operation

Put the earbuds in the charging case and, with the case open, press the pairing button for 10 seconds or more.
  • The factory reset proceeds while the battery status indicator on the charging case flashes red. Please reconnect the device after factory reset.

Declaration of Confirmation

FCC NOTICE TO USERS

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the user's authority to operate the equipment.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.


To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.

DECLARATION OF CONFORMITY

Hereby, LG Electronics declares that the radio equipment type this headset is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/declaration

Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.

Android, Google Play, the Google Play logo, and other related marks and logos are trademarks of Google LLC.

FCC ID: ZNFHBSFN7

Additional Information

Radio frequency exposure

This Bluetooth LG Stereo Headset is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth-equipped mobile device by receiving and transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency range 2402 to 2480 MHz. Your Bluetooth headset is designed to operate in compliance with the RF exposure guidelines and limits set by national authorities and international health agencies when used with any compatible LG Electronics mobile phone.

Bluetooth connection precautions

The following environments affect the range and reception of Bluetooth signals:

  • When walls, metal, human bodies, or other obstacles exist between the Bluetooth device and the connected device.
  • When equipment that uses 2.4 GHz frequency signals (wireless LANs, wireless phones, microwave ovens, etc.) is placed near the devices being used.
  • When using a Bluetooth device (TV, laptop, etc.) other than the mobile phone, the sound quality may be affected by the specifications and performance of the device.

Potentially explosive atmosphere

Turn off your electronic device when in any area with a potentially explosive atmosphere. Although this is uncommon, your electronic device could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked.

Emergency calls


This Bluetooth headset and the electronic device connected to the headset operate using radio signals and mobile and landline networks as well as user- programmed functions, which cannot guarantee connection under all conditions. Therefore, you should never rely solely upon any electronic device for essential communications (e.g., medical emergencies). Remember, in order to make or receive calls, the headset and the electronic device connected to the headset must be switched on and in a service area with adequate mobile signal strength. Emergency calls may not be possible on all mobile phone networks or when certain network services and/or phone features are in use. Check with your local service provider.

Battery information

A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used.
Do not expose the battery to extreme temperatures, never above +50°C (+122°F) or below -10°C (+14°F). For maximum battery capacity, use the battery at room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures between 0°C (+32°F) and +45°C (+113°F).

Recycling the battery in your Bluetooth headset

The battery in your Bluetooth headset must be disposed of properly and should never be placed in municipal waste. The LG Electronics service partner that removes the battery will dispose of it according to local regulations.

Conditions

  • The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics reserves the right to refuse warranty service if this information has been removed or changed after the original purchase of the product from the dealer.
  • If LG Electronics repairs or replaces the product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced parts or components will become the property of LG Electronics.
  • This warranty does not cover any failure of the product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with instructions for use and maintenance of the product. Nor does this warranty cover any failure of the product due to accident, modification or adjustment, acts of God, or damage resulting from liquid.
  • This warranty does not cover product failures due to improper repair installations, modifications, or service performed by a non-LG Electronics authorized person. Tampering with any of the seals on the product will void the warranty.
  • THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
  • Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. The warranty provided does not affect the consumer's statutory rights under applicable national legislation in force, nor the consumer's rights against the dealer arising from their sales/purchase contract.

Limited Warranty

Subject to the conditions of this Limited Warranty, LG Electronics warrants this product to be free from defects in design, material, and workmanship at the time of its original purchase by a consumer, and for a subsequent period of one (1) year. Should your product need warranty service, please return it to the dealer from whom it was purchased or contact your local LG Electronics contact center to get further information.

Important Safety Information

Avoiding hearing damage


Permanent hearing loss may occur if you use your headset at a high volume.

Set the volume to a safe level. Over time you can become accustomed to a higher volume that may sound normal but can be damaging to your hearing.

If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time that is required before your hearing could be affected.

Hearing experts suggest that to protect your hearing:

  • Limit the amount of time you use the headset at a high volume.
  • Avoid turning up the volume to block out noisy surroundings.
  • Turn the volume down if you can't hear people speaking near you.

Using headsets safely

Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

RISK GROUP 2

UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.

WHEN OPENING THE CHARGING CASE OR WIRELESS CHARGING, THE UV FUNCTION DOES NOT WORK.

Specifications and Features

Item Comments
Bluetooth Specifications V 5.0 (Headset/Hands-Free/A2DP/AVRCP)
Battery Earbud: 3.7 V / 55 mAh, Lithium-ion
Charging case: 3.7 V / 390 mAh, Lithium-ion
Music Play Time Earbuds & With Charging case (ANC ON) Up to 7 & Up to 21 hours (Up to 5 / Up to 15 hours)*
Charging Time Earbud: within an hour / Charging case: within 2 hours
Fast Charging: 5 min charge for up to 60 min playtime
※ When charging wired at room temperature
Rated Input Voltage Earbud: DC 5 V, 110 mA
Charging case: DC 5 V, 500 mA
Operating Temperature 0°C (+32°F) ~ +40°C (+104°F)
Dimensions (mm) / Weight (g) Earbud: 16.2 mm (W) X 32.7 mm (L) X 26.8 mm (H) / 5.6 g (One earbud)
Charging case: 54.5 mm (W) X 54.5 mm (L) X 27.6 mm (H) / 39 g
Frequency range 2402 MHz to 2480 MHz
Output power (Max.) 10 dBm

*Duration of use may vary depending on the connected mobile device, features being used, settings, signal strength, operating temperature, frequency band, and other methods of use. Fast charging feature does not apply when charging case is placed on wireless charging device such as a pad. Wireless charging feature charges at a slower rate due to less power being transmitted to the charging case.

www.lg.com

Copyright © 2021 LG Electronics Inc. All Rights Reserved

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LG TONE Free HBS-FN7 - Bluetooth Stereo Headset Manual

Advertisement

Need Assistance?

Do you have a question about the TONE Free HBS-FN7 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents