Troubleshooting - KitchenAid KERC600 Use And Care Manual

PROBLEM
The display is
showing "PF"
A letter fol-
lowed by the
number shows
on the display
(for example
"E3", "F1")
The display is
showing "F5"
or "E3"
The key pads
do not operate
If none of these items was causing your problem, see "Requesting Assistance or Service" on
page 50 or 51.
POSSIBLE CAUSE
There has been a power
failure.
The power cord is not prop-
erly grounded.
Pads not touched long
enough, or not enough time
between each pad pressed.
The Control Lock has been
set.
The Sabbath mode has been
set. ("SAb" appears on the
display.
The range is not properly
grounded.
T
roubleshooting
WHAT TO DO
Reset the clock. (See page 24.)
Press CANCEL/OFF. If the code
does not disappear, call for service.
(See "Requesting Assistance or
Service" on pages 50-51.)
See Installation Instructions.
Hold down the pad a short time, and
allow a short time between each pad
entry.
Turn off the Control Lock by opening
the oven door, pressing and holding the
Control Lock pad for 5 seconds. (See
"Using the control lock" on page 20.)
Turn off the Sabbath mode by
opening the oven door, waiting up to
15 seconds, and pressing and
holding Number Pad 6 for 5 seconds.
Call an electrician to make sure the
outlet is well grounded. If it is well
grounded, and the key pads still do
not operate, call a service technician.
49