Kenwood kdc-u359w Instruction Manual page 13

Wiring connection KDC-U2159B
(for
Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1
Purple
: Rear speaker (right)
B2
Purple/black
B3
Gray
: Front speaker (right)
B4 Gray/black
B5
White
: Front speaker (left)
B6
White/black
B7
Green
: Rear speaker (left)
B8
Green/black
KDC-U2259R KDC-U2359G
/ /
Front output
Rear/subwoofer output
Antenna terminal
Yellow (Battery wire)
Ignition wire (Red)
Red (Ignition wire)
Unit
Battery wire
(Yellow)
Red (A7)
Yellow (A4)
)
Fuse (10 A)
Light blue/yellow
(Steering remote
control wire)
Blue/White
(Power control wire/
Antenna control wire)
Brown
(Mute control wire)
ISO connectors
If no connections are made, do not let the wire
come out from the tab.
STEERING WHEEL
To the steering wheel remote control
REMOTE INPUT
adapter
REMOTE CONT
To the power control terminal when using
ANT CONT
the optional power amplifier, or to the
P. CONT
antenna control terminal in the vehicle.
To the terminal that is grounded when
either the telephone rings or during
MUTE
conversation. (To connect the Kenwood
navigation system, consult your navigation
manual.)
ENGLISH | 13