Assembling The Front Wheel; Adjusting The Front Wheel Static Balance - Yamaha FJR1300A Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
EAS21960

ASSEMBLING THE FRONT WHEEL

1. Install:
• Wheel bearings
New
• Oil seals
M MMM M MMM M M MMM M
a. Install the new wheel bearings and oil seals in
the reverse order of disassembly.
EC3P61021
CAUTION:
Do not contact the wheel bearing inner race
"1" or balls "2". Contact should be made
only with the outer race "3".
NOTE:
Use a socket "4" that matches the diameter of
the wheel bearing outer race and oil seal.
L LLL L LLL L L LLL L
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel, or both, the front
wheel static balance should be adjusted.
• Adjust the front wheel static balance with the
brake discs installed.
1. Remove:
• Balancing weight(s)
2. Find:
• Front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
M MMM M MMM M M MMM M
a. Spin the front wheel.
b. When the front wheel stops, put an "X
at the bottom of the wheel.
email: info@motomatrix.co.uk
New
M MMM M M MMM M M MMM M
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
" mark
1
MMM
c. Turn the front wheel 90° so that the "X
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
f. Repeat steps (d) through (f) several times un-
til all the marks come to rest at the same spot.
g. The spot where all the marks come to rest is
LLL
the front wheel's heavy spot "X".
L LLL L LLL L
3. Adjust:
• Front wheel static balance
M MMM M MMM M
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
NOTE:
Start with the lightest weight.
MMM
b. Turn the front wheel 90° so that the heavy
spot is positioned as shown.
4-17
FRONT WHEEL
2
L LLL L L LLL L L LLL L L LLL
M MMM M M MMM M M MMM M M MMM
" mark
1
" mark at
L LLL
M MMM