Audio Settings; Hdmi Color Format; Hdmi Deep Color; Progressive Mode - Samsung BD-J4500 User Manual

Bd Wise (Samsung TVs only)
BD Wise is Samsung's latest inter-
connectivity feature.
When you connect a Samsung player
and a Samsung TV with BD Wise to
each other via HDMI, and BD Wise is
on in both the player and TV, the player
outputs video at the video resolution and
frame rate of the Blu-ray Disc/DVDs.
NOTES
✎
When BD Wise is on, the Resolution setting
`
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
If the player is connected to a device that does
`
not support BD Wise, you cannot use the BD
Wise function.
For proper operation of BD Wise, set the BD
`
Wise menu of both the player and the TV to On.
Resolution
Lets you set the output resolution of
the HDMI video signal to Auto, 1080p,
1080i, 720p or 480p. The number
indicates the number of lines of video
per frame. The i and p indicate interlaced
and progressive scan, respectively. The
more lines, the higher the quality.
10
Resolution according to the output
mode
• Blu-ray disc/E-contents/digital
Contents playback
HDMI / connected
HDMI Mode
Output
Setup E-contents/
Blu-ray
Digital
Disc
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution of
Auto
of TV input TV input
1080p@60F
1080p@60F 1080p@60F
(Movie Frame : Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24Fs)
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
• dVd playback
HDMI / connected
Output
Setup
HDMI Mode
BD Wise 480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
480p 480p
NOTES
✎
If the TV you connected to the player does
`
not support Movie Frame or the resolution
you selected, the message "If no pictures are
shown after selecting 'Yes', please wait for 15
seconds to return to the previous resolution.
Do you want to change the resolution?"
appears. If you select Yes, the TV's screen
will go blank for 15 seconds, and then the
resolution will revert to the previous resolution
automatically.
If the screen stays blank after you have
`
changed the resolution, remove all discs, and
then press and hold the p button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display
Setup that your TV will support.
When the factory default settings are restored,
`
all stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame
`
feature for the player to use the Movie Frame
(24Fs) mode.
movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature
to Auto allows you to adjust the player's
HDMI output to 24 frames per second for
improved picture quality.
You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this frame
rate. You can select Movie Frame only
when the player is in the HDMI 1080p
output resolution modes.

HdmI Color Format

Lets you set the color space format for
HDMI output to match the capabilities of
the connected device (TV, monitor, etc).

HdmI deep Color

Lets you output video from the HDMI
OUT jack with Deep Color. Deep
Color provides more accurate color
reproduction with greater color depth.

progressive mode

Lets you improve picture quality when
viewing DVDs.

Audio Settings

digital Output

Lets you select the digital audio output
format that is suitable for your TV or
AV Receiver. For more details, please
refer to the Digital Output Selection
table below.