Audio Settings - Samsung BD-J4500 User Manual

BD Wise (Samsung TVs only)
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
✎
NOTES
 When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.
 If the player is connected to a device that
does not support BD Wise, you cannot use
the BD Wise function.
 For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to
On.
Resolution
Lets you set the output resolution of the
HDMI video signal to Auto, 1080p, 1080i,
720p or 576p/480p. The number indicates
the number of lines of video per frame. The
i and p indicate interlaced and progressive
scan, respectively. The more lines, the higher
the quality.
10
Resolution according to the output
mode
• Blu-ray Disc/E-contents/Digital Contents
playback
HDMI / connected
Output
HDMI Mode
E-contents/
Blu-ray Disc Digital
Setup
contents
Resolution of
BD Wise 1080p
Blu-ray Disc
Max. Resolution Max. Resolution
Auto
of TV input of TV input
1080p@60F
1080p@60F 1080p@60F
(Movie Frame : Off)
Movie Frame :
1080p@24F 1080p@24F
Auto (24 fps)
1080i 1080i 1080i
720p 720p 720p
576p/480p 576p/480p 576p/480p
• DVD playback
HDMI / connected
Output
Setup
HDMI Mode
BD Wise 576i/480i
Auto Max. Resolution of TV input
1080p 1080p
1080i 1080i
720p 720p
576p/480p 576p/480p
✎
NOTES
 If the TV you connected to the player does
not support Movie Frame or the resolution
you selected, the message "If no pictures
are shown after selecting 'Yes', please wait
for 15 seconds to return to the previous
resolution. Do you want to change the
resolution?" appears. If you select Yes, the
TV's screen will go blank for 15 seconds,
and then the resolution will revert to the
previous resolution automatically.
 If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the p button
on the front of the player for more than 5
seconds. All settings are restored to the
factory default. Follow the steps on the
previous page to access each mode and
select the Display Setup that your TV will
support.
 When the factory default settings are
restored, all stored user BD data is deleted.
 The Blu-ray Disc must have the 24 frame
feature for the player to use the Movie
Frame (24 fps) mode.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature to
Auto allows you to adjust the player's HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this frame
rate. You can select Movie Frame only when
the player is in the HDMI 1080p output
resolution modes.
HDMI Colour Format
Lets you set the colour space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
HDMI Deep Colour
Lets you output video from the HDMI OUT
jack with Deep Colour. Deep Colour provides
more accurate colour reproduction with
greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.

Audio Settings

Digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output
Selection table below.