Operating Your Oven - Black & Decker DINING-IN TO3290XSD Use And Care Manual

O P ER ATING YO UR OVE N
1 . Plug into outlet .
2 . Display light will illuminate and all function lights will light up momentarily .
3 . When turned on, the oven will either default to factory settings or to the last
setting used . (see Function Chart on page 11)
4 . Choose the desired function and proceed with detailed function information
below .
Convection Baking Function |
Display will blink until desired temperature setting is met . Timer will not start
until the oven is preheated .
1 . Press the Convection Baking function button (
illuminate .
2 . The oven will either default to factory function settings or to the last setting
used . (see Function Chart on page 10)
3 . If needed, press the temperature buttons (
temperature . Up arrow for a higher temperature, and down for a lower
temperature .
4 . If needed, press the timer buttons (
for a longer time period, and Down for a shorter time period . Select Stay On
( ) by pressing the Down arrow past Zero . The Stay On icon (
show in the display panel .
5 . Press the Start/Stop button (I/0) to begin heating the oven . Display will blink
while oven is preheating .
6 . Once it's preheated there will be an audible beep and the display will stop blinking;
Place the food in the oven on the middle or low rack position to begin baking .
Note: Use a metal, oven-tempered glass, or ceramic baking dish.
7 . If using the oven timer, there will be an audible beep once the baking cycle is
complete and the oven will stop heating . If not using the timer, press the Start/
Stop Button (I/0) once cooking cycle is complete .
8 . Unplug the appliance when not in use .
) . The blue light will
) to select the desired
) to select the desired time . Up arrow
7
) will