Epson PowerLite 1751 User Manual page 95

projector's ID. Then releasethe buttons.
5. Pressthe ID buttonon the remotecontrolto checkif the ID-settingprocessworked.
You see a messagedisplayedby the projector.
• If the remotecontrolis listedas On, the remotecontrolID is set to operateonlythe listedprojector.
• If the remotecontrolis listedas Off, the remotecontrolID is notset properly.Repeat the steps
aboveto set the ID to matchthe projectoryouwantto control.
Note: You mustset the remotecontrolID to matchthe projectorID each timeyouturnon the
projectoryouhave set it to control.
Parent topic:
Matching Multiple-Projector Display Quality
You can match t he display quality ofmultiple projectors
1. Turn onallthe projectors
2. SetIDnumbers oneach projector.
3. Make sure allthe projectors
4. Itisbest t omatch t wo projectors
ID buttonon the remotecontrolwhileyoupressthe numericbuttonthatmatchesthe
ProjectorIdentification SystemforMultipleProjectorControl
onwhich y ou want t omatch t he display quality.
areusing t he same Color Mode setting.
atatime, soset the remote control IDtomatch t he first p rojector.
that w ill p roject next t oeach other.
95