Diagram Of Parts - Mr. Coffee TM3 SERIES Instruction Manual

Clean Your Iced Tea P t
1. Wash the pitcher, pitcher lid, steeping basket and steeping basket lid with
warm water and mild detergent. Rinse thoroughly. (Please refer to the diagram
of parts listed below).
WARNING: To prevent injury from hot steam, do not plug the unit in until water
is in the reservoir and the pitcher is in place.
2. Fill the pitcher with water to the top water level mark on the pitcher and pour
into the water reservoir. Do not overfill. Replace the steeping basket and lid on top of
the machine.
3. Place one tray of ice cubes into the pitcher.
4. Turn the steeping dial to the open position as illustrated in Diagram A below.
5. Slide the pitcher with lid, spout first, under the machine. Make sure the spout lid
is open.
6. Plug the cord into an electrical outlet and depress the push button (ON) to turn the
machine on. The indicator light will illuminate to let you know the machine is ON.
7. When the water has cycled through, the machine will shut off automatically.
8. Slide the pitcher away from the machine and discard the water.
D
IAGRAM OF
S
TEEPING
B
ASKET
L
ID
S
TEEPING
B
ASKET
W
ATER
R
ESERVOIR
P
USHBUTTON
(ON)
I
NDICATOR
L (ON)
IGHT
P
(T P I
HIS RODUCT S
™ Before First Use
–
M
ARTS
NOT D
ISHWASHER
S
TEEPING
D
IAL
6
TM3
ODEL
S )
AFE
S L
POUT ID
I O
S PEN
P
ITCHER
L
ID
P
ITCHER
S
TEEPING
O
PEN
(D
IAGRAM
D
IAL IN
P
OSITION
A)