Getting Connected; Connecting To The Internet; Chrome; Connecting To Bluetooth Devices - Alcatel one touch Pop User Manual

6

Getting connected

To connect to the internet with this phone, you can use GPRS/EDGE/3G/4G
networks or Wi-Fi, whichever is most convenient.
6�1

Connecting to the Internet

6�1�1 GPRS/EDGE/3G/4G/4G LTE
The first time you turn on your phone with your SIM card inserted, it
will automatically configure your network service: GPRS, EDGE, 3G, 4G
or 4G LTE.
To check the network connection you are using, touch the Menu key on the
Home screen, then touch Settings/More���/Mobile networks/Preferred
network type.
6�1�2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on your phone even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch the Menu key from the Home screen, then touch Settings.
• Touch the switch beside Wi-Fi to turn on/off Wi-Fi.
• Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
• Touch a Wi-Fi network to connect. If the network you selected is secured,
you are required to enter a password or other credentials (you may
contact the network operator for details). When finished, touch Connect.
To activate notification when a new network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon
will appear on the status bar whenever the phone detects an available
wireless network within range. The following steps activate the notification
function when Wi-Fi is on:
• Touch the Menu key and Settings from the Home screen.
• Touch Wi-Fi, then touch the Menu key and Advanced from Wi-Fi screen.
• Mark/Unmark the Network notification checkbox to activate/deactivate
this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your
preference.
• Touch the Menu key and Settings from the Home screen.
Touch Wi-Fi, and then touch
• .
• Enter the name of the network and any required network information.
• Touch Save.
When successfully connected, your phone will be connected automatically
the next time you are within range of this network.
To forget a Wi-Fi network
The following steps prevent automatic connections to networks which you
no longer wish to use.
• Turn on Wi-Fi, if it's not already on.
• In the Wi-Fi screen, touch & hold the name of the saved network.
• Touch Forget in the dialog that opens.
32
6�2 Chrome ����������������������������������������������
Using the Browser, you can enjoy surfing the Web.
To access this function, touch from the Home screen, then touch

Chrome.

On the Chrome screen, touch the URL bar at the top, enter the address of
the web page, then confirm.
6�3

Connecting to Bluetooth devices

Bluetooth is a short-range wireless communication technology that you
can use to exchange data, or connect to other Bluetooth devices for
various uses.
To access this function, touch the Menu key from the Home screen, then
touch Settings/Bluetooth, your advice and other available ones will show
on the screen.
To turn on Bluetooth
• Touch the Menu key from the Home screen, then touch Settings�
• Touch to activate/deactivate this function.
To make your phone more recognizable, you can change your phone name
which is visible to others.
• Touch the Menu key from the Home screen,
• Touch Settings/Bluetooth.
• Touch the Menu key and Rename phone.
• Enter a name, and touch Rename to confirm.
You are recommended to use ALCATEL ONETOUCH Bluetooth
(1)
headsets, which have been tested and proved compatible
with phone. You can go to www.alcatelonetouch.com for more
information about ALCATEL ONETOUCH Bluetooth headsets.
To make device visible
• Touch the Menu key from the Home screen.
• Touch Settings/Bluetooth.
• Touch your advice to make it visible or invisible.
Touch the Menu key and Visibility timeout to select the visible time.
•
To pair/connect your phone with a Bluetooth device
To exchange data with another device, you need to turn Bluetooth on
and pair your phone with the Bluetooth device with which you want to
(1)
exchange data.
• Touch the Menu key from the Home screen.
• Touch Settings/Bluetooth.
• Touch SEARCH FOR DEVICES.
• Touch a Bluetooth device you want to be paired with in the list.
A dialog will popup, touch Pair to confirm.
•
• If the pairing is successful, your phone connects to the device.
To disconnect/unpair from a Bluetooth device
• Touch the Settings icon beside the device you want to unpair.
• Touch Unpair to confirm.
6�4

Connecting to a computer

With the USB cable, you can transfer media files and other files between
your micro SD card or internal storage and the computer.
Before using MTP or PTP, first mark USB debugging�
• To access this function, touch Settings/About phone, then touch
Build number 7 times. Then touch Settings/Developer options/USB
debugging.
33