Chicago Electric 61792 Owner's Manual & Safety Instructions page 8

gases from your breathing zone and
general area.
• Where ventilation is questionable,
have a qualified technician take
an air sampling to determine the
need for corrective measures. Use
mechanical ventilation to improve
air quality. If engineering controls
are not feasible, use an approved
respirator.
• Follow OSHA guidelines for
Permissible Exposure Limits (PEL's)
for various fumes and gases.
• Follow the American Conference of
Governmental Industrial Hygienists
recommendations for Threshold
Limit Values (TLV's) for fumes and
gases.
• Have a recognized specialist in
Industrial Hygiene or Environmental
Services check the operation
and air quality and make
recommendations for the specific
welding or cutting situation.
20. Ground this product. This Welder is
equipped with a 240 volt, grounded,
3-prong Power Cord Plug. Never
remove the grounding prong or
modify the Power Cord Plug in any
way. Do not use adapter plugs with
this product.
Item 61792 For technical questions, please call 1-888-866-5797.
21. WARNING: Handling the Power
Cord on this product will expose you
to lead, a chemical known to the
State of California to cause cancer,
birth defects, and other reproductive
harm. Wash hands after handling.
(California Health & Safety Code §
25249.5 et seq.)
22. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
Page 8