To specify the slideshow speed
(JPEG image files only)
1
Press
DISPLAY during slideshow.
The Control Menu appears.
If "INTERVAL" is not displayed on
the Control Menu, press
repeatedly until "INTERVAL" appears.
2
Press or repeatedly to select
(INTERVAL), then press ENTER.
The options for "INTERVAL" appear.
3
Press or repeatedly to select the
desired transition interval.
The default setting is underlined.
NORMAL: Sets to the standard
duration.
FAST: Sets the duration shorter
than "NORMAL. "
SLOW 1: Sets the duration longer
than "NORMAL. "
SLOW 2: Sets the duration longer
than "SLOW 1. "
4
Press ENTER.
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
To select a transition effect for image
files in the slideshow
(JPEG image files only)
1
Press
The Control Menu appears.
DISPLAY
If "EFFECT" is not displayed on the
Control Menu, press
repeatedly until "EFFECT" appears.
2
Press or repeatedly to select
The options for "EFFECT" appear.
3
Press or repeatedly to select the
desired setting.
The default setting is underlined.
MODE 1: The image sweeps in
MODE 2: The image sweeps in
MODE 3: The image stretches out
MODE 4: The image randomly
MODE 5: The next image slides
OFF: turns off this function.
4
Press ENTER.
The selected setting takes effect.
DISPLAY during slideshow.
DISPLAY
(EFFECT), then press ENTER.
from top to bottom of the screen.
from left to right of the screen.
from the center of the screen.
cycles through the effects.
over the current image.
GB