Table of Contents
Advertisement
Home Screen Features - Continued
Music
Lights
Status Indicators
Summer Timer/
Lights Timer
Spa/Temp
Lock
Battery Life
Battery
Charging
Working Screen Icons
Home Icon
or
Return Icon
Advance Icon
TEMPERATURE CONTROL
Press the actual temperature on Home screen to
display Set Temperature screen.
The factory set temperature of the spa water is 100°F (38°C).
After the spa has been used, the last temperature value set by the user
will be stored in memory. If power is disconnected from the spa, it will
automatically revert to the last set temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
If installed, press this icon to access
the first music screen.
Press this icon to access the first
Lights screens.
This indicator is on whenever the
Summer Timer or Lights Timer is ON
This indicator is on whenever the
Spa Lock or Temperature Lock is ON.
This indicator tells you how much
battery life is still available to the
wireless remote control.
A flashing indicator tells you when
the battery is charging in the dock.
When indicator is solid, battery is
charged.
Press to return to the Home screen.
Press to return to the previous
screen.
Press to advance to the next screen.
The set temperature range is from
80°F to 104°F (26°C to 40°C).
NOTE: The water temperature may
vary depending on the current use
and condition of your spa and outside
temperatures.
MEMORY SCREEN
Press
on Home screen to display Memory screen.
CLEAN CYCLE SCREEN
Press
on Home screen to display Clean Cycle screen.
SETTINGS SCREENS
Press
on Home screen to display first Settings Screen.
Page 14
Press to activate the last saved set of operating
functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither of the
above buttons are used. Screen will automatically
revert back after 10 seconds of non activity.
Provided as a convenient timer
for manually adding water care
chemicals (see How to Add
Chemicals section). Activates jet
pump 1 on high speed for a ten
minute period.
Press to begin the Clean Cycle. The screen
will briefly display CLEAN CYCLE SPA
CLEANING.
Press to return to Home screen if START is not
pressed. Screen will automatically revert back
after 10 seconds of non activity.
The first Settings screen allows
you to turn Temperature Lock, Spa
Lock, Lights Timer and Summer
Timer On or Off.
Operating Instructions
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
