Panasonic SJ-MJ55GH Service Manual page 16

3. Press the
"LD " of the LCD).
4. Press the
of the LCD).
5. Set the laser power at 600
of the remote controller. / [Specified range: 600
Caution:
Proceeding on to the subsequent adjustment procedure with the
read power exceeding "over 660
optical pickup.
6. Set the laser power with the
" changes to "LDOK " in the LCD).
7. Press the
"T0E " on the LDC.
8. Remove the laser power meter. Laser power adjustment is
finished.
<Stick type>
key of the remote controller ("T0E " changes to
key of the remote controller ("LD " changes to "LP "
W±10% by using VOL+ and VOL- key
key of the remote controller ("LDOK " changes to
W" will result in damage to the
key of the remote controller ("LP
Fig. 7
W±10%]