Cleaning The Beard Styler Attachment - Philips RQ1187/37 User Manual

ENGLISH
C F
1 Switch on the appliance with the trimmer
attached.
2 Rinse the trimmer under a hot tap for some
time.
3 After cleaning, switch off the appliance.
Tip: For optimal trimmer performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.

Cleaning the Beard Styler attachment

(RQ1187/37 only)
Clean the Beard Styler attachment every time you
have used it.
1 Pull the comb off the Beard Styler attachment.
2 Rinse the Beard Styler attachment and the
comb separately under a hot tap for some
time.
Note: You can also clean the Beard Styler attachment
and the comb with the cleaning brush supplied.
3 Lubricate the trimmer teeth with a drop of
sewing machine oil every six months.
Cleaning the cleansing brush attachment
(RQ1187/43, RQ1187/37 only)
1 Switch off the appliance.
2 Detach the brush head from the brush base.
3 Clean them thoroughly with warm water and
soap.
4 Dry the brush attachment with a towel.
53