Programming
1)
Programme
P10
Con@ctivity
- only on communication-
enabled appliances retrofitted
with a communication
module/dongle
P15
Audible tone if the sensors are
covered
P16
Sensor switch reaction speed
1)
Programmes not shown here have no allocation.
2)
The factory setting is shown in bold.
3)
After switching the cooktop on, appears in the timer display for several seconds.
4)
The intermediate settings are shown in the cooking zone display by a dot after the power
setting. Auto heat-up is indicated by flashing alternately with the continued cooking
setting.
46
2)
Settings
Status
S0
Not available
S1
Signed off
S2
Signed on
S0
Off
S1
On
S0
Slow
S1
Normal
S2
Fast