Alarm Overview - Danfoss ECL Comfort 210 Installation Manual

Installation Guide

5.11 Alarm overview

MENU > Alarm > Alarm overview
This menu shows the alarm types, for example "2: Temp. monitor".
The alarm has been activated if the alarm symbol is present to the
right of the alarm type.
Danfoss District Energy
ECL Comfort 210 / 310, application A260
Resetting an alarm, in general:
MENU > Alarm > Alarm overview:
Look for alarm symbol in specific line.
(Example: "2: Temp. monitor")
Move cursor to the line in question.
Push dial.
Alarm overview:
Alarm sources are listed in this overview menu.
Some examples:
"2: Temp. monitor"
"5: Pump 1"
"10: Digital S12"
Related to the examples, the numbers 2, 5 and 10 are used in the alarm
communication to the BMS / SCADA system.
Related to the examples, "Temp. monitor", "Pump 1" and "Digital S12"
are the alarm points.
Alarm numbers and alarm points might differ depending on actual
application.
VI.LG.F2.02 DEN-SMT/DK 87