Capturing Video And Time Lapse Photos; To Start Recording Video; To Stop Recording - GoPro Hero 4 session Quick Start Manual

/ Capturing Video and Time Lapse Photos

When your camera is not connected to the remote (sold separately)
or the GoPro App, two capture modes are available: Video and Time
Lapse. To access more modes or change camera settings, see
Accessing Camera Settings (page 20).
CAPTURING VIDEO
The default video resolution is 1080p30.

To Start Recording Video:

Short press the Shutter/Select button [
automatically powers on, emits three beeps, and begins recording
video. The camera status lights blink while the camera is recording.
16
]. Your camera
/ Capturing Video and Time Lapse Photos
If the memory card is full or the battery is out of power, your
camera automatically stops recording and saves the video before
powering off.

To Stop Recording:

Short press the Shutter/Select button [
automatically stops recording, beeps once, and powers off to
maximize battery life.
PRO TIP: You can turn off the camera status lights and your camera's
sound. For more information, see
]. The camera
Setup Mode (page 53).
17