Calling Features; Auto Dial Numbers - AT&T MLS-Series Quick Reference Manual

Calling Features

To use these features on an MLS-18D, MLS-12D, or MLS-12 phone, press the calling feature
button. To use on an MLS-6, MLC-6, MDC 9000, or MDW 9000 phone, press [
2-digit code.
How to Use
on MLS-6,
Feature
MLC-6, MDC 9000,
or MDW 9000
Privacy
Not Available
Last Number
Press [
Feature
Redial
Press [
Recall
Feature
Conference
Press [
Feature
Drop

Auto Dial Numbers

To store an extension number or outside number for one-touch dialing:
Press [ ] [ 0 ] [ 0 ].
1. Feature
Press a programmable Auto Dial button (see p. 3).
2.
Press left [ ] and dial the extension number, or dial the telephone number up to
3. Intercom
20 digits, including special functions, see box below.
(To set up an Auto Dial button for group paging, press [
Access, press [
Intercom
To store additional Auto Dial numbers, repeat Steps 2 and 3.
4.
5. Press [ ] [ 0 ] [ 0 ] when you are done.
Feature
To insert a...
Pause (1.5 seconds)
Recall
Stop
Touch-Tone Enable
How to Use on
MLS-18D, MLS-12D,
and MLS-12
Press [
Privacy
Press again to turn off
Press [
] [ 0 ] [ 5 ]
Last Num
] [ 0 ] [ 3 ]
Press [ ]
Recall
] [ 0 ] [ 6 ]
Press [ ]
Drop
] [ 1 ] [ 5 ].)
6
Feature
Description
]
Prevents other people with the
same line from joining your
calls. A steady green light next
to [ ] shows that Privacy
Privacy
is on.
] Redials the last outside num-
ber you dialed. Useful for
redialing a busy number.
"Recalls" a dial tone. If you are
not on a PBX or Centrex, use
Recall to end a call without
hanging up–you will get a dial
tone and can then make
another call. Othenvise, use
Recall to get the PBX/Centrex
dial tone.
Drops the last party added to a
conference call.
] [ ] [ 7 ]; for Music
Intercom
Press...
[ ]
Hold
[ ]
Spkr
[ ]
Mic
[ ]
Transfer
] plus the