Asc Intervention; Abs Error - BMW R1200RT Rider's Manual

Possible cause:
3
ABS self-diagnosis rou-
tine not completed
36
ABS is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
z
(min 5 km/h))
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.

ABS error

lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It is possible to continue riding
the motorcycle if you make
allowance for the ABS failure.
You should also take account
of the additional information on
situations that can lead to an
ABS fault ( 108).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.

ASC intervention

flashes rapidly.
ASC has detected insta-
bility at the rear wheel and re-
sponded by reducing the torque.
The warning lamp flashes longer
than the ASC intervention lasts.
This feature continues to fur-
nish the rider with visual feed-
back confirming that the system
has initiated active closed-loop
intervention even after the critical
situation has passed.
ASC self-diagnosis not
completed
flashes slowly.
Possible cause:
ASC self-diagnosis rou-
tine not completed
ASC is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.