Noise Filter and
Power Cord
① Remove the two
screws attaching the
noise filter.
② Disconnect both
connectors in the
noise filter.
Remove the power
cord from the noise
filter.
Pressure Switch
① Disconnect the leads
from pressure switch
and detatch the
pressure switch from
the machine.
② Disconnect the
pressure tube from
the pressure switch.
21
2) Disassembly of the Noise Filter,
Power Cord, Inlet Valve, Pressure
Switch, and Dispenser Housing.
① Remove 2 screw attaching the panel on the back.
② Disassemble the rear panel.
Inlet Valve
① Disconnect the
leads from the inlet
valve and remove
three screws.
② Remove the hoses
and output pipes
from the input
valve.
③ Remove the inlet
valve.
Dispenser
Housing
① Remove the hoses
and output pipes
from the input
valve.
② Disassemble the
connector pipe and
the dispenser
housing.