Spark Plug - Stihl BR 350 Instruction Manual

Blower
Hide thumbs Also See for STIHL BR 350:
Table of Contents

Advertisement

Available languages

Available languages

English
At sea level
Turn high speed screw (H)
N
counterclockwise (richer) – no
further than stop.
18

Spark Plug

If the engine is down on power,
N
difficult to start or runs poorly at idle
speed, first check the spark plug.
Fit a new spark plug after about 100
N
operating hours – or sooner if the
electrodes are badly eroded. Install
only suppressed spark plugs of the
type approved by STIHL – see
"Specifications".
Removing the spark plug
2
Pull off the spark plug boot (1)
N
vertically.
Unscrew the spark plug (2).
N
Checking the spark plug
Clean dirty spark plug.
N
Check electrode gap (A) and
N
readjust if necessary – see
"Specifications".
Rectify the problems which have
N
caused fouling of the spark plug.
Possible causes are:
Too much oil in fuel mix.
Dirty air filter.
Unfavorable running conditions.
If the spark plug comes with a
detachable adapter nut (1), screw the
adapter onto the thread and tighten it
down firmly to reduce the risk of arcing
and fire.
BR 350, BR 430
A
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stihl br 430

Table of Contents