Resetting A Filter; Setting On Timer - Samsung MWR-SH00N User Manual

Resetting a filter

Setting on timer

When an indoor unit is turned off,
SOL MWR-SH00N_IB_04149A-02_EN.indd 10
f When the appears on the remote controller, clean the filter and press and
f
hold the [Filter Reset] button for 3 seconds to reset the filter usage time .
1 . Press the [Timer] button to set on time .
- When pressing the [Timer] button one time, the time for on timer function
will blink .
- Press the [ ] or [ ] button to adjust the on time from 30 minutes to 3 hours
by 30 minutes unit and from 3 to 18 hours by one hour unit .
2 . Press the [Set] button to complete the setting .
- When pressing the [Set] button, the set time will stop blinking .
- If you do not press the [Set] button within 3 minutes after selecting the set
time, the time you have set will be canceled . Therefore, you should check that
the time for on timer function has been set .
Press and hold the [Set] button for 3 seconds .
Cancel
• On timer function can be set only when an indoor unit is turned off .
NOTE
ENGLISH-10
2016-03-02 오전 11:12:52