Advertisement
FUNCTION SWITCH DETAILS (cont.)
PHOTO QUALITY
The camera's current PHOTO QUALITY setting will be displayed by the LCD
when the FUNCTION SWITCH is set to PHOTO QUALITY. Use the Up and
Down buttons to select the desired setting. Press the ENTER button to confirm
the new setting.
The Photo Quality settings are:
- Low: 1280 x 960 (1.3MP)
- High: 1600 x 1200 (2.0MP)
PHOTO DELAY
The camera's current PHOTO DELAY setting will be displayed by the LCD
when the FUNCTION SWITCH is set to PHOTO DELAY. The camera will
wait a specified number of minutes between each picture. Use the UP and
DOWN buttons to select the desired setting. Press the ENTER button to
confirm the new setting.
The Photo Delay settings are:
- 1min
- 5min
- 10 min
- 30 min
- 60 min
MULTI-SHOT
The camera's current MULTI-SHOT setting will be displayed by the LCD when
the FUNCTION SWITCH is set to MULTI-SHOT. The camera will
automatically take the specified number of photos, with a 5 second delay
between photos. Use the UP and DOWN buttons to select the desired setting.
Press the ENTER button to confirm the setting.
The Multi-Shot settings are:
- 1-Shot
- 2-Shots
DELETE ALL
The camera's current DELETE ALL setting will be displayed by the LCD when
the FUNCTION SWITCH is set to DELETE ALL. This function will clear all
contents on the SD Card. Use the UP and DOWN buttons to select the desired
setting. Press the ENTER button to confirm the Delete All function.
ADVANCED INFORMATION
1
VIEWING PICTURES - USB
1. Plug provided USB cable into the USB port on your Windows
XP/Vista/Windows 7 or Macintosh computer.
2. Plug other end of USB cable into the camera's USB port.
3. To access JPG pictures and AVI movie files, navigate to "My Computer" and
double click the "DCIM\100-MDGC" folder.
4. To exit USB mode, follow computer's instructions for properly
disconnecting a removable drive and then unplug the USB cable from the
computer and the camera.
2
INFORMATION ON PICTURE
Page 5
Page 6
Date
Time
Advertisement
