Chevrolet Spark 2016 User Manual page 109

108 Instruments and Controls
DIC Buttons
1. SET/CLR: Press to set or clear
the menu item displayed.
2. / : Use to scroll through
the menus.
3. MENU: Press to display the
Trip/Fuel menu and the Vehicle
Information menu. This button
is also used to return to or exit
the last screen displayed on
the DIC.
Vehicle Information Menu
Items (Base Level DIC)
Press MENU to view the DIC menu.
Some items display in the upper
display area, some in the lower
display area, and others use both
the upper and lower display areas.
Use / to scroll through the
menu items. Not all items are
available on every vehicle. The
following is a list of possible menu
items:
Remaining Oil Life
Units
Tire Learn
Remaining Oil Life
This menu is not available while the
vehicle is moving. This display
shows an estimate of the oil's
remaining useful life. If 99
displayed, that means 99% of the
current oil life remains.
When the remaining oil life is low,
the % CHANGE message will
appear on the display. The oil
should changed as soon as
possible. See Engine Oil 0 210. In
addition to the engine oil life system
monitoring the oil life, additional
maintenance is recommended in the
Maintenance Schedule. See
Maintenance Schedule 0 279.
Remember, the Oil Life display must
be reset after each oil change. It will
not reset itself. Also, be careful not
to reset the Oil Life display
accidentally at any time other than
when the oil has just been changed.
It cannot be reset accurately until
the next oil change. To reset the
engine oil life system, press
SET/CLR while the Oil Life display
is active. See Engine Oil Life
System 0 212.
Units
This menu is not available while the
% is
vehicle is moving. Press SET/CLR
while the unit display is active and
move / to change units when
UNIT SET is displayed. Press
SET/CLR to confirm the setting.
Select 1, 2, or 3 for the unit display.
1 is metric units, 2 is Imperial units,
and 3 is US units. This will change
the displays on the cluster and DIC
to the type of measurements
selected.