Film Loading Procedure - Canon Motor Zoom 8 EEE Instruction Manual

FILM LOADING PROCEDURE
1. Fig . Open camera cover by turning lock counter-clockwise.
2 . Fig . 2 Open film gate by pulling back pressure plate knob.
3 . Fig. 2 Bend film about half an inch
4. Fig . 2
S.
Fig. 2
6.
from the end and insert into
slit of Canon take-up reel.
Initially, wind film approximate·
Iy ten times around
take-up
reel clockwise. Drop
load both
reels onto respective shafts.
Place
film through film gate,
emulSion
side out, and push
pressure plate sh ut. Then test
smooth advance by running
film for a few frames.
Close cover, advance film from
letter
S
to 0 on the footage
counter .
23