Table of Contents
Advertisement
Available languages
Available languages
WARNING:
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO
read this entire operator's manual before operating this machine. Understand all warnings, instruc
tions, and controls.
DO
keep all guards in place and in good condition.
DO
wear safety approved hearing, eye, head and respiratory protection.
DO
read and understand all warnings and instructions on the saw.
DO
read and understand the symbol definitions contained in this manual.
DO
keep all parts of your body away from the blade and all other moving parts.
DO
know how to stop the saw quickly in case of emergency.
DO
turn the "ON/OFF" switch to the "OFF" position prior to connecting the machine to the power source.
DO
make sure electric powered saws are plugged into a properly grounded circuit
DO
turn off the motor and disconnect from the power source prior to working on saw.
DO
inspect the blade, flanges and shafts for damage before installing the blade.
DO
use only steel center diamond blades manufactured for use on tile saws.
DO
use only blades marked with a maximum operating speed greater than the blade shaft speed. Verify
speed by checking bladeshaft RPM.
DO
read all safety materials and instructions that accompany any blade used with this saw.
DO
inspect each blade carefully before using it. If there are any signs of damage or unusual wear, DO NOT
USE THE BLADE.
DO
disconnect the saw from the power source prior to installing, removing or tightening the blade.
DO
mount the blade solidly and firmly, Wrench tighten the arbor nut.
DO
make sure the blade and flanges are clean and free of dirt and debris before mounting the blade on the
saw.
DO
use only the blade flanges supplied with the saw. Never use damaged or worn blade flanges.
DO
use the correct blade for the type of work being done. Check with blade manufacturer if you do not know
if blade is correct.
DO
use caution and follow the instructions when loading and unloading the saw.
DO
operate this machine only in well ventilated areas.
DO
instruct bystanders on where to stand while the saw is in operation.
DO
establish a training program for all operators of this machine.
DO
clear the work area of unnecessary people. Never allow anyone to stand in front of or behind the blade
while the motor is running.
DO
make sure the blade is not contacting anything before starting the motor.
DO
use cautions when lifting and transporting this machine.
DO
clean the water tray frequently.
8
SAFETY FIRST!
WARNINGS
DO's AND DO NOT's
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
DO
Hide quick links:
Advertisement
Table of Contents
