Cloning Radio Settings - Motorola VL50 User Manual

Cloning Radio Settings

You can copy VL50 radio settings from one radio (the source) to a second radio using the
56531 Multi-Unit Charger (MUC) optional accessory. See the MUC User's Guide for more
information.
You can clone only one radio at a time. A multi-channel radio can clone to a single-channel
radio, but only the first channel is cloned. The MUC does not have to be plugged in for cloning,
but both radios require charged batteries.
1. On the source radio, press and hold Push to Talk and
radio on. The radio beeps and displays k.
2. Place the source radio in one of the charging pockets.
3. Turn the target radio on and place it in the charging pocket that is
paired with the pocket containing the source radio. There are
3 paired charging pockets as indicated by the 3 pairs of charging
status LEDs.
4. Press and hold
T
settings to the target radio. If cloning was successful, P or Pass
displays on the source radio and the target radio displays all feature
icons. If cloning was not successful, F or Fail displays on the source
radio.
5. Turn the target radio off and back on again to use.
6. To clone another radio, repeat steps 3 and 4.
7. To exit programming mode on the source radio, press and hold Push to Talk until k
no longer appears.
on the source radio. The source radio transmits its
for 3 seconds while turning the
T
Paired
pockets
LEDs
031102o
27