Panasonic SA-XR700EG Service Manual page 23

3. Doctor mode function at some remote control codes as below table.
Remote Control
Selector
CH 1 TUNER
CH 2 TUNER
CH 3 TUNER
CH 4 TUNER
CH 5 TUNER
CH 6 TUNER
CH 7 TUNER
CH 8 If the input selector is TUNER, auto tuning function is started to upward on current frequency.
CH 9 If the input selector is TUNER, auto tuning function is started to downward on current frequency.
CH 0 All indicators of FL are displayed. All LED are off. Refer to Fig. 6.4.
Note : After this setting, only 'POWER' button or 'Checker Command' code by the remote control can be entered.
CH UP Check Main µP software version.
CH DOWN Check µP software version and HDMI µP software version are displayed at each time pressing.
SUBWOOFER VCR (Analog)
MUTING DVD 6CH
PLIIx CD
NEO:6 TV/STB
TV/AV BD/DVD
LEVEL DVR
EFFECT CD
OFF TV/STB
SFC MOVIE BD/DVD
SFC MUSIC DVR
TEST No change
-/L CD
+/R CD
DIMMER If the input selector is TUNER in E2 mode. Display Mode (PS/PTY/RT) is changed.
Fig. 6.3
Test Mode Function and settings
Sound Mode
STEREO
STEREO
STEREO FM 98.3MHz, All Led are displayed
STEREO
STEREO
STEREO
STEREO
-
-
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
STEREO
SURROUND Scan the test noise output channel with 500ms
STEREO
STEREO
23
other settings
Frequency : FM min
Frequency : FM max
Frequency : AM min
Frequency : AM max
AM 765kHz (9kHz/step)
AM 770kHz (10kHz/step)
All CH Output Mode
-
Analog
Analog
Analog
Analog
Digital (COAX 2)
Digital (OPT 1)
Digital (COAX 1)
Digital (OPT 2)
intervals.
Balance is set to leftmost
Balance is set to rightmost
SA-XR700EG
Vol/Tone
-48dB/0dB
-48dB/0dB
-18dB/0dB
-48dB/0dB
-48dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB
-48dB/0dB
-48dB/0dB
-48dB/0dB
-48dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB