Care And Maintenance; Cleaning The Unit; Troubleshooting Guide - Jensen jsbw-650 User Manual

Wall mountable 2.1-channel bluetooth soundbar speaker with fm radio
Hide thumbs Also See for jsbw-650:
Table of Contents

Advertisement

NOTE:
If you connect this unit to the Line-Out Jack of your external device then you only
need to adjust the volume control of this unit. If you connected the Headphone Jack
of your external device then you may need to adjust both the volume control of your
external device and the volume control of this unit to find the most desirable volume
setting.
Press the
POWER button to turning off the unit when you finish listening. Don't
forget to switch off the power of your external device as well.
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.

CLEANING THE UNIT

To prevent fire or shock hazard, disconnect your unit from the AC power source
when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other
furniture, Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax
or polish sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with
a soft cloth slightly dampened with a mild soap and water solution. Never use
abrasive cloths or polishes, as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
Should you experience difficulties in the use of this player please refer to the following chart or
call 1-800-777-5331 for Product Service and Support.
Symptom
The unit does not
respond (no power)
Unit is ON but there
is low or no volume
No Sound

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

Possible Problem
The unit is disconnected from
the AC outlet.
The AC outlet has not power.
The volume control has been
turned all the way down.
Bluetooth speaker is not linked
with the cell phone
Speaker placement out of
range
Reconnect to the AC outlet.
Try the unit on another outlet.
Turn the Volume control to a higher
output.
Go through "Bluetooth Operations"
process to link the speakers.
Relocate the speaker within
Bluetooth operating range
13
Solution

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents