Auxiliary Input - Jensen jsbw-650 User Manual

NORMAL
In addition, you can adjust treble and bass effects by using the TREBLE & BASS +/-
buttons.
- Press the MUTE
speaker temporarily, the Mode Indicator LED will flash.
- Press the button again to resume to normal speaker playback.
LISTENING TO AUDIO FROM A TV/DVD PLAYER/VCR OR DVR
You can connect the JSBW-650
RCA connectors located on the back of the unit.
1. Connect the external TV/DVD/VCR/DVR to AUX-IN 1 RCA connectors on the back
of the unit (RCA connection cable included). Make sure
attached to the corresponding color coded connectors on the device.
2. Press the POWER button to turn the unit on.
3. Select external audio input by pressing the
tap the /SOURCE button on the main unit repeatedly
Mode Indicator LED turns green.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and listen to them through the speakers of this
unit.
1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX-IN 2 jack on the right hand side (top panel) of main unit
and the other end of the cable into the Line-out Jack or Headphone Jack of your
external audio device.
3. Turn on the external audio device
4. To select auxiliary audio input,
/SOURCE button on main unit repeatedly to select
LED turns orange.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
JAZZ POP
MUTE (Remote Control Only)
button on remote control to mute the sound output from
to other external audio devices using the AUX-IN 1

AUXILIARY INPUT

and the main unit.
press the SOURCE button on remote control or tap
CLASSIC
the color coded plugs are
SOURCE button on the remote control or
to select AUX IN 1
AUX IN 2 mode, Mode Indicator
12
ROCK
mode,