Special Features; Interference Eliminator Codes; Push To Talk Timeout Timer - Motorola Talkabout T5900 User Manual

Special Features

Interference Eliminator Codes

Interference Eliminator Codes help minimize interference by providing a choice of
code combinations. Your radio has 99 Interference Eliminator Codes.
Codes 1–38 are the standard codes that appear on other FRS/GMRS radios.
Codes 39–99 are additional digital codes added for superior interference
protection.
To set the code for a channel:
1. Press until the code starts to flash.
\
2. Press or to select the code.
] [
3. Press M to save the code setting.
You can set a different code for each channel using this procedure. An extended
press of or allows you to scroll through the Interference Eliminator Codes
] [
rapidly so you can quickly reach the code you want.
Note: You must set the Interference Eliminator Code to on a radio that uses
0
Interference Eliminator Codes to communicate with radios that do not have
Interference Eliminator Codes.

Push to Talk Timeout Timer

To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press M for 60 continuous
seconds.
19