Ir Pcb, Main Switch Pcb; Front Panel Assy; Belt Loading; Cd Mecha Block, Door - Technics SL-C700E Service Manual

6.11. IR PCB, MAIN SWITCH PCB

1. Remove the FRONT PANEL UNIT.
(See 6.8. FRONT PANEL UNIT, steps 1 and 2.)
2. Remove the coupler and screws for removal.
*Remove binding wires as necessary.
• Coupler: P831B
• Screw: 7
3. Remove the solders (P951A and P951B).
 Note when replacing the IR PCB and MAIN SWITCH PCB
• When replacing the IR PCB and MAIN SWITCH PCB,
remove the solder on the PCB to be replaced, and then
reconnect it again.

6.12. FRONT PANEL ASSY

1. Remove the FRONT PANEL UNIT.
(See 6.8. FRONT PANEL UNIT, steps 1 and 2.)
2. Remove the TOUCH SENSOR PCB and PICT LIGHTING
WINDOW.
(See 6.9. TOUCH SENSOR PCB, PICT LIGHTING
WINDOW, steps 2 and 3.)
3. Remove the DISPLAY PCB and OLED ASSY.
(See 6.10. DISPLAY PCB, OLED ASSY, steps 2 and 3.)
4. Remove the IR PCB and MAIN SWITCH PCB.
(See 6.11. IR PCB, MAIN SWITCH PCB, steps 2 and 3.)

6.13. BELT LOADING

1. Stand the main unit carefully. Using a flathead
screwdriver, slide the lever of the cam slide in the arrow
direction. (The tray comes out approx. 1 cm as shown.)
2. Remove.
 Note when attaching the BELT LOADING
• When attaching the BELT LOADING, make sure there is no
twist or deflection.

6.14. CD MECHA BLOCK, DOOR

1. Remove the couplers.
• Coupler: P0102, P0103, P0104
2. Remove the screws for removal.
• Screw: 4
29